medpurest's blogger

  Microplastic pollution, known as "pm2.5 in water", has become a direct source of pollution in the ocean, soil and drinking water, affecting human health. Medical   protective coveralls   is almost made of different polymer materials. The development of a new material can replace the existing material to form a new series of products. As most of the existing   protective suits  are designed to be disposable, they are used heavily during the pandemic. Used medical   protective clothing   should be disposed of centrally to prevent secondary transmission of the virus. Therefore, protective clothing materials must be developed to be repeatable and degradable. Due to the particularity of application scenarios, most medical  protective gown  is disposable. Therefore, environment-friendly materials should be considered in the development of medical  protective gown , and must be considered before material selection and protective clothes desig...

  Surgical gowns   are a type of   isolation clothing  worn for protection from pathogens during surgery. They provide an extra layer of cleanliness and hygiene to the surgical team, which is especially important in the hospital setting where more than one patient may be undergoing surgery at any given time. The first step to choosing a   surgical gown   for your practice is determining what fabric you prefer: cotton or synthetic? Cotton offers superior comfort and breathability but can wear out quicker than some synthetics; whereas synthetic fabrics offer more durability but a less natural feel. Synthetic fabrics also tend to cost less on average than cotton ones do – so it’s really up to you! These fabrics have large pores through which microorganisms can easily flow, resulting in poor barrier qualities. Closely woven textiles should be combined with polyester and long-staple cotton and treated with liquid-repellent fluorocarbons to improve the barrier qu...

  Generally speaking, the production of medical   protective coveralls   needs to go through the steps of raw material preparation, cutting, stitching, tightening, adhesive and pressing, finished products, sterilization and disinfection, warehousing and so on. Among them, sterilization and disinfection takes the longest time. Ethylene oxide is mostly used for sterilization and disinfection of materials, which requires 7-14 days of analysis, seriously affecting the production efficiency of medical   protective gown , and a more efficient sterilization method is urgently needed. Irradiation sterilization can be sterilized without disassembly and assembly, which is efficient and prevents secondary pollution. In 2011, Japan has listed the operation specifications of irradiation sterilization in the sterilization standard for protective clothing, which will reduce the sterilization time to less than 1 d. In order to address the shortage of medical protective clothes durin...

  Generally speaking, there are two main ways to protect medical staff in the process of treating patients. The first is vaccination and the second is personal protection. However, it takes a long time for an infectious disease to be promoted to the market from the emergence to the development of corresponding vaccines, and it cannot adapt to the outbreak at all. Therefore, personal protection is the most timely and appropriate way. Medical   protective clothing   is the most important part of personal protective equipment for medical personnel. It can cut off the transmission route of COVID-19 virus, prevent the spread and transmission of the virus, and control cross-infection in medical institutions. It is of great significance to protect the health and life safety of medical workers. At the same time, during the epidemic, a large number of personnel in epidemic prevention, medical waste disposal and other work are needed to ensure the orderly and smooth implementation ...

  Since the outbreak of the epidemic, the white coat has been replaced by generous   protective coveralls . After long hours of work, they wear   protective gown , tired and sweaty. In addition to the unsuitable design, the comfort of medical disposable  protective clothing  fabrics is also poor. Disposable medical protective clothing is designed for short-term use, and the use time should not exceed 2 hours. But during the outbreak, when the supply of protective clothing is insufficient and health workers often have to wear protective clothing for more than 6 hours, comfort becomes very important.   The surface of the human body evaporates a large amount of water every day, most of which evaporate in the form of sweat. Most of the clothes we wear sweat a lot and are comfortable and breathable. In order to enhance the protective power of medical protective gown, the fabric is usually treated with a film or film, which is thick and breathable, and has p...

  Tyvek   Protective Coveralls  (Tyvek) is a wide range of   protective gown   manufactured by Tyvek (Tyvek) for use by emergency responders to industrial workers. Tyvek  protective clothing  offers the industry's proven most scientific solutions, including the reliable brand 3360Tyvek for dust protection, Tychem for liquid and gas hazardous chemical protection, NOMEX for heat and flame protection, and KEVLAR for cutting and wear protection. TYVEK protective suit is made of traditional TYVEK polymer coating. It has the strength/weight ratio and softness of TYVEK protective suit, which can completely protect fine and harmful dust, concentrated inorganic acid and alkali and water and salt solution. Protects up to 2 bar pressure from spatter. The Tevetron protective suit (Tevetron) has been proven to protect fluids, blood and pathogens in blood through osmosis tests with blood and virus substitutes. Function description of Trevek protective suit: TYVEK pr...

  It makes surgery safer Why use single-use surgical pad - nosocomial infection Nosocomial infections (nosocomial) occur in 2 to 3 million patients each year and result in 88, 000 deaths per year It costs $4.5 billion a year to treat nosocomial infections Composition of nosocomial infections (CDC 1990-1996) Nosocomial infection % Average increase in length of stay Average increase in treatment costs  $ UTI 33.1 1.0 680 Pneumonia 15.5 5.9 5683 SSI 14.8 7.3 3152 Blood infection 13.1 7.4 3517 other 23.5 4.8 1617 SSI adds a lot to health care costs According to the CDC, the increase in medical costs may be due to: 1. Longer hospital stays 2. Re-hospitalization 3. Re-surgery 4. Antibiotic use 5. Critical care The bacterial origin of SSI Air is 5% Equipment 10% Medical staff 35% 50% of patients with 100% How to avoid SSI? 1. Sterilization of surgical instruments 2.  Isolation gown 3. Sterilization  surgical drapes 4. Disinfect skin and control bacterial colonies The role o...

  Basic precautions: basic measures that every medical worker must follow. Applicable objects: all medical personnel in the diagnosis and treatment work (no matter whether there is an epidemic of infectious diseases); Protective equipment: medical mask, work clothes, work shoes, work cap. Enhanced protection: In addition to basic protection, strengthen protection measures according to the risk of infection exposure. Protective objects: medical, pharmaceutical, nursing, technical, industrial and other personnel who may come into contact with patients' blood and body fluids or objects contaminated by blood and body fluids or environmental surfaces; Medical personnel who enter the infectious disease area, observation room or ward (epidemic period); Medical personnel, laboratory technicians and other supporting personnel, workers or drivers for the transport of infectious disease patients. Protective equipment: medical gloves, medical surgical masks, medical protective masks, goggles, ...