跳至主要内容

Instruction of Surgical Drape

1. Utility Surgical Drape 
Use four utility drapes cover around the incision.
1) Fold the utility 1/3, the first second and third utility drape folds toward the assistant, and the fourth drape faces the fold and passes it to assistant in order.
2) The assistant receives the folded drape and lays on the underside, above, opposite side and side of the incision respectively. The inner edge of each drape is within 3cm from the incision line. The surgical drape needs a little adjustment and can only be moved from inside to outside.
3) The four corners of the utility drape are clamped with cloth clips to expose the cut out portion. Nowadays, many sterile plastic films are used for clinical application. After the skin is cut, the film still adheres to the edges of the wound, preventing the remaining bacteria on the skin during the operation.

2. Medium Surgical  Drape
Use two pieces of sterilized medium drape on the upper and lower sides of the incision. User need to be careful and can’t touch non-sterile items with their hands or fingers.
3. Surgical Drape
Use the laparotomy drape facing the incision, with the short end toward the head and the long end toward the lower extremity, and then stretch upwards and downwards. The hand rolled up inside the large sheet to avoid contamination when unfolding. The short end is required to cover the anesthesia shelf, and the long end covers the instrument tray. The sides and feet should hang down 30 cm beyond the operating table.

https://www.medpurest.com/surgical-pack/

评论

此博客中的热门博文

Tyvek Protective Coveralls

  Tyvek   Protective Coveralls  (Tyvek) is a wide range of   protective gown   manufactured by Tyvek (Tyvek) for use by emergency responders to industrial workers. Tyvek  protective clothing  offers the industry's proven most scientific solutions, including the reliable brand 3360Tyvek for dust protection, Tychem for liquid and gas hazardous chemical protection, NOMEX for heat and flame protection, and KEVLAR for cutting and wear protection. TYVEK protective suit is made of traditional TYVEK polymer coating. It has the strength/weight ratio and softness of TYVEK protective suit, which can completely protect fine and harmful dust, concentrated inorganic acid and alkali and water and salt solution. Protects up to 2 bar pressure from spatter. The Tevetron protective suit (Tevetron) has been proven to protect fluids, blood and pathogens in blood through osmosis tests with blood and virus substitutes. Function description of Trevek protective suit: TYVEK pr...

Biodegradability, reusability and safety of protective clothing

  Microplastic pollution, known as "pm2.5 in water", has become a direct source of pollution in the ocean, soil and drinking water, affecting human health. Medical   protective coveralls   is almost made of different polymer materials. The development of a new material can replace the existing material to form a new series of products. As most of the existing   protective suits  are designed to be disposable, they are used heavily during the pandemic. Used medical   protective clothing   should be disposed of centrally to prevent secondary transmission of the virus. Therefore, protective clothing materials must be developed to be repeatable and degradable. Due to the particularity of application scenarios, most medical  protective gown  is disposable. Therefore, environment-friendly materials should be considered in the development of medical  protective gown , and must be considered before material selection and protective clothes desig...

Production process of medical protective clothing

  Generally speaking, the production of medical   protective coveralls   needs to go through the steps of raw material preparation, cutting, stitching, tightening, adhesive and pressing, finished products, sterilization and disinfection, warehousing and so on. Among them, sterilization and disinfection takes the longest time. Ethylene oxide is mostly used for sterilization and disinfection of materials, which requires 7-14 days of analysis, seriously affecting the production efficiency of medical   protective gown , and a more efficient sterilization method is urgently needed. Irradiation sterilization can be sterilized without disassembly and assembly, which is efficient and prevents secondary pollution. In 2011, Japan has listed the operation specifications of irradiation sterilization in the sterilization standard for protective clothing, which will reduce the sterilization time to less than 1 d. In order to address the shortage of medical protective clothes durin...