跳至主要内容

Introduction of manufacturing equipment in MedPurest

 In today's highly developed society, different types of new influenza viruses and unidentified infectious agents continue to emerge, and it is increasingly important to provide protection for medical personnel in non-sterilized environments. The disposable surgical gown made by the non-woven material has good breathability, comfort and softness, and brings convenience and good medical effects to the surgeon. Today, surgical gowns with different levels of protection have achieved good results in the comprehensive assessment of disinfection, safety, comfort, particulate contamination, barrier properties, prevention of cross-infection, and environmental protection. 
In order to meet the growing market demand, Anhui MedPurest Medical Technology Co., Ltd. recently introduced and and improved a high-barrier SMMMS production line. According to the company's general manager Long Shushan, the SMMMS spun-melt nonwoven fabric consists of a 5-layer structure (spunbond layer, 3-layer meltblown layer, spunbond layer), and the middle microfiber (as thin as the skin) plays the role of a reliable, selectively filtered barrier ,which is the best choice for medical disposable surgical gowns. At the same time, the company uses PTFE composite membrane as the isolation layer to develop medical multi-functional surgical suits for human body characteristics in Asia. It has good physical and mechanical properties, as well as durable waterproof, water-repellent, anti-bacterial, anti-static, flame-retardant, moisture-permeable and other properties. It has good barrier properties to the blood and virus under natural conditions and pressure conditions, and the blocking rate is greater than 99%. All the specifications meet GB19082 and WSB58.

评论

发表评论

此博客中的热门博文

Biodegradability, reusability and safety of protective clothing

  Microplastic pollution, known as "pm2.5 in water", has become a direct source of pollution in the ocean, soil and drinking water, affecting human health. Medical   protective coveralls   is almost made of different polymer materials. The development of a new material can replace the existing material to form a new series of products. As most of the existing   protective suits  are designed to be disposable, they are used heavily during the pandemic. Used medical   protective clothing   should be disposed of centrally to prevent secondary transmission of the virus. Therefore, protective clothing materials must be developed to be repeatable and degradable. Due to the particularity of application scenarios, most medical  protective gown  is disposable. Therefore, environment-friendly materials should be considered in the development of medical  protective gown , and must be considered before material selection and protective clothes desig...
发表评论
阅读全文

Production process of medical protective clothing

  Generally speaking, the production of medical   protective coveralls   needs to go through the steps of raw material preparation, cutting, stitching, tightening, adhesive and pressing, finished products, sterilization and disinfection, warehousing and so on. Among them, sterilization and disinfection takes the longest time. Ethylene oxide is mostly used for sterilization and disinfection of materials, which requires 7-14 days of analysis, seriously affecting the production efficiency of medical   protective gown , and a more efficient sterilization method is urgently needed. Irradiation sterilization can be sterilized without disassembly and assembly, which is efficient and prevents secondary pollution. In 2011, Japan has listed the operation specifications of irradiation sterilization in the sterilization standard for protective clothing, which will reduce the sterilization time to less than 1 d. In order to address the shortage of medical protective clothes durin...
发表评论
阅读全文

Production requirements for disposable surgical gown

Disposable surgical  gown   Strictly control the sterilization process to strictly control the production environment and packaging process Raw materials entering the factory for inspection; strict control of sterilization process The markings are clearly and correctly printed; the markings are marked in accordance with the relevant requirements. SpecificationTips on the instructions Pre-use training   The properties of the bonded or sewn parts should meet the standard requirements. Disposable surgical gown should be supplied sterile and should be sterilized by a confirmed sterilization process. Chemical performance requirements If the disposable surgical gown is sterilized with ethylene oxide, the residual ethylene oxide should be no more than 10 mg/kg. Biological performance requires a single-use surgical gown to be non-irritating and delayed hypersensitivity to the skin. Structural requirements such as the tie should specify the length of the ...
发表评论
阅读全文