跳至主要内容

The difference between full-surgery Gown and half-surgery Gown

Sterile area:

First, when the surgical gown is thrown up, the inner surface is in contact with the body, and the disinfection of the arm is only on the elbow, so the hand protrudes from the sleeve of the surgical gown. Since the inner surface of the surgical gown is folded, the inside of the surgical gown is contaminated, which may cause an opponent. Pollution.

When the hand is extended -
The semi-packed belt is sagging, and the drooping portion is beyond the lower boundary of the sterile area of the chest. Therefore, after handing the belt, bring gloves.

The all-inclusive belt is attached and located in the sterile area. After taking the gloves first, then untie the knot. (After untidying, let the visiting nurse use a sterile oval pliers or a small partner with gloves to take the belt and turn it around once, then tie it. [The reason is that you turn your own circle because if you are a companion or a tour When the nurse turns the circle, it needs to turn a big circle. The space in the operating room is limited. It is very likely that others will encounter the corresponding items and have bad consequences.

评论

发表评论

此博客中的热门博文

Biodegradability, reusability and safety of protective clothing

  Microplastic pollution, known as "pm2.5 in water", has become a direct source of pollution in the ocean, soil and drinking water, affecting human health. Medical   protective coveralls   is almost made of different polymer materials. The development of a new material can replace the existing material to form a new series of products. As most of the existing   protective suits  are designed to be disposable, they are used heavily during the pandemic. Used medical   protective clothing   should be disposed of centrally to prevent secondary transmission of the virus. Therefore, protective clothing materials must be developed to be repeatable and degradable. Due to the particularity of application scenarios, most medical  protective gown  is disposable. Therefore, environment-friendly materials should be considered in the development of medical  protective gown , and must be considered before material selection and protective clothes desig...
发表评论
阅读全文

Production process of medical protective clothing

  Generally speaking, the production of medical   protective coveralls   needs to go through the steps of raw material preparation, cutting, stitching, tightening, adhesive and pressing, finished products, sterilization and disinfection, warehousing and so on. Among them, sterilization and disinfection takes the longest time. Ethylene oxide is mostly used for sterilization and disinfection of materials, which requires 7-14 days of analysis, seriously affecting the production efficiency of medical   protective gown , and a more efficient sterilization method is urgently needed. Irradiation sterilization can be sterilized without disassembly and assembly, which is efficient and prevents secondary pollution. In 2011, Japan has listed the operation specifications of irradiation sterilization in the sterilization standard for protective clothing, which will reduce the sterilization time to less than 1 d. In order to address the shortage of medical protective clothes durin...
发表评论
阅读全文

Protective Coveralls

  Since the outbreak of the epidemic, the white coat has been replaced by generous   protective coveralls . After long hours of work, they wear   protective gown , tired and sweaty. In addition to the unsuitable design, the comfort of medical disposable  protective clothing  fabrics is also poor. Disposable medical protective clothing is designed for short-term use, and the use time should not exceed 2 hours. But during the outbreak, when the supply of protective clothing is insufficient and health workers often have to wear protective clothing for more than 6 hours, comfort becomes very important.   The surface of the human body evaporates a large amount of water every day, most of which evaporate in the form of sweat. Most of the clothes we wear sweat a lot and are comfortable and breathable. In order to enhance the protective power of medical protective gown, the fabric is usually treated with a film or film, which is thick and breathable, and has p...
发表评论
阅读全文