跳至主要内容

It can be use for patients with improve patient gown

In view of the past patient gown is not too humanized, convenient to replace the shortcomings, our company anhui MedPurest medical technology co., ltd. combined with the needs of the patient's life and the characteristics of care will be improved, the choice of small dots, broken flowers, colored cotton fabric, the production of both sides of the slit broadband connection of the collar shirt, low collar two sleeve slit shirt, invisible crotch knee pants. In the clinical use, the patient gown feels cozy, replaceable, very human, to protect the patient's privacy, to facilitate the procedure, to be more clinical.
The patients who are lying on bed have been unconscious for a long period of time, some disabled, some elderly people are weak, some people need to be rehabilitative after being angry, and their life cannot be self-worked in the bed, often due to illness and physical reasons, the life of the patient cannot be justified, and thepatient's clothing is not convenient for the patients to be close to the clinic, difficult to be worn out, the working efficiency is not convenient, and the patient's privacy cannot be very well protected in the clinic operation. To do that, I've been working with a group of employees, making improvements to the patient's clothes, and making a more clinical patient suit. , the effect is significant.
1. The improved patient clothing is made of pure cotton woven fabric, cotton undershirt, cotton fabric and other materials. In terms of fabric color, you can choose magnolia bottom/grass green bottom + small white dots/broken flowers
2. Design and production
a: double slit blouse. The overall structure is similar to that of ordinary cardigan, with low round collar, front slit can be tied and pasted, bottom slit can be pasted and connected by three flat strips. The front of the sheet is 4 to 5cm on the edge of the front, and the last one is 1 cm to the edge of the front and the pasting to the front, and a 5cm, and a 5cm wide flat belt with the front and then paste it.
b:Low round collar shoulder two sleeves open the undercoat. Its whole structure is a simple shirt and a low round collar, which can be pasted, and two sleeve are open to that cuff from the front part of the armspace, and are connected with the tethered band at the front.

评论

发表评论

此博客中的热门博文

The Usage and Disinfection of Sterile Surgical Packs

Use methods and requirements ： 1.     In a dry environment,  sterile packs  are valid for seven days. 2.     Before using, check the name and the date of sterilization of the aseptic packs, whether the pack is loose or moist, and check the color change of the chemical indicator tape. 3.     Place the sterile  surgical pack  flat on the clean, dry and spacious operating table. 4.     After untying the tie belt and wrapping it, fold it under the back table cover, then pinch the outer corner of the back table cover with your fingers, and then uncover the outer corner, left and right corner and inner corner of the back table cover in turn.If a double-packing sterile surgical kit is used, the lining should be opened with sterile forceps. 5.     Use sterile forceps to pick up the required items and place them in a prepared sterile area. 6.     If the items in the package ...
发表评论
阅读全文

Introduction of surgical packs

Surgical packs   are generally made of paper, absorbent gauze, non-woven fabric and plastic film, sterilized by ethylene oxide(EO), one-time to use, it’s convenient and practical. Surgical packs   are generally composed of surgical drapes, mayo stand cover and back table cover . The surface of the surgical pack is neat, and the appearance is smooth, no odor, no defect or damage; the sewing or heat-shrinking is also straight, firm and evens. In addition, according to surgical requirements can increase other surgical accessories. Disposable surgery during the operation, have good role in blocking bacteria, aspiration, etc.. To ensure the sterile environment during surgery, and reducing the risk of cross-infection.           Anhui Medpurest Medical Technology Co., Ltd has got the FDA certification in 2017.   The products provided by the company include : Disposable Surgery Laminectomy Pack，Disposable Delivery Pack，Disposable Spinal/Joint Pack，D...
发表评论
阅读全文

Production process of medical protective clothing

  Generally speaking, the production of medical   protective coveralls   needs to go through the steps of raw material preparation, cutting, stitching, tightening, adhesive and pressing, finished products, sterilization and disinfection, warehousing and so on. Among them, sterilization and disinfection takes the longest time. Ethylene oxide is mostly used for sterilization and disinfection of materials, which requires 7-14 days of analysis, seriously affecting the production efficiency of medical   protective gown , and a more efficient sterilization method is urgently needed. Irradiation sterilization can be sterilized without disassembly and assembly, which is efficient and prevents secondary pollution. In 2011, Japan has listed the operation specifications of irradiation sterilization in the sterilization standard for protective clothing, which will reduce the sterilization time to less than 1 d. In order to address the shortage of medical protective clothes durin...
发表评论
阅读全文