跳至主要内容

Sterile single - berth method for limb surgery

1. Objective to expose the minimal skin area necessary for surgical incision, cover other parts of the surgical patient, make the environment around the surgery become a large scope of sterile area, prevent bacteria from entering the incision, in order to avoid and minimize the pollution during the operation.
2. Methods after disinfection of the skin of the surgical site, the sterilizing physician and the instrument nurse should first lay the sterile towel around the operation and then cover the sterile sheet.Major surgery involves covering the whole or most of the patient, leaving only the incision exposed.Generally, at least four layers of sterile towel sheet should be covered.
1 big hole towel, 4 therapeutic towels, 1 sterile bandage, 4 single ones, taking knee surgery as an example, covering steps: 1.The treatment towel block around the top of the surgical area, fixed with towel forceps.(3) from the hip to the end of the lower limbs, has 2 in the single shop.(4) in a piece of treatment towel placed in the middle of the sheet to prepare to wrap the legs and feet, the package of the leg and foot cloth with sterile bandage wrapped, placed in the middle sheet.
(5) a single piece from the edge of the incision up to spread the big hole towel, the lower limb of the surgical side by the hole stretched out after the surgery to apply the film surgical towel to the incision site
1 big hole towel, 4 therapeutic towels, 1 sterile bandage, 3 single ones in the middle, the procedure of covering the elbow surgery as an example:(2) one piece of treatment towel was wrapped around the inflatable tourniquet and fixed with towel forceps.(3) the treatment towel to prepare a bandage hand and arm, put the arm, and sterile bandage bandage.(4) in a piece of single from the edge of the incision oblique upward to cover the chest and anesthesia frame.(5) block a single from the lower edge of the incision oblique downward to cover the chest and lower body of the patient.6 shop cave towel, surgery side of the upper limb from the hole, expand the cave towel.7 the film surgical towel applied to the site of the incision.

评论

发表评论

此博客中的热门博文

Tyvek Protective Coveralls

  Tyvek   Protective Coveralls  (Tyvek) is a wide range of   protective gown   manufactured by Tyvek (Tyvek) for use by emergency responders to industrial workers. Tyvek  protective clothing  offers the industry's proven most scientific solutions, including the reliable brand 3360Tyvek for dust protection, Tychem for liquid and gas hazardous chemical protection, NOMEX for heat and flame protection, and KEVLAR for cutting and wear protection. TYVEK protective suit is made of traditional TYVEK polymer coating. It has the strength/weight ratio and softness of TYVEK protective suit, which can completely protect fine and harmful dust, concentrated inorganic acid and alkali and water and salt solution. Protects up to 2 bar pressure from spatter. The Tevetron protective suit (Tevetron) has been proven to protect fluids, blood and pathogens in blood through osmosis tests with blood and virus substitutes. Function description of Trevek protective suit: TYVEK pr...
发表评论
阅读全文

Biodegradability, reusability and safety of protective clothing

  Microplastic pollution, known as "pm2.5 in water", has become a direct source of pollution in the ocean, soil and drinking water, affecting human health. Medical   protective coveralls   is almost made of different polymer materials. The development of a new material can replace the existing material to form a new series of products. As most of the existing   protective suits  are designed to be disposable, they are used heavily during the pandemic. Used medical   protective clothing   should be disposed of centrally to prevent secondary transmission of the virus. Therefore, protective clothing materials must be developed to be repeatable and degradable. Due to the particularity of application scenarios, most medical  protective gown  is disposable. Therefore, environment-friendly materials should be considered in the development of medical  protective gown , and must be considered before material selection and protective clothes desig...
发表评论
阅读全文

Production process of medical protective clothing

  Generally speaking, the production of medical   protective coveralls   needs to go through the steps of raw material preparation, cutting, stitching, tightening, adhesive and pressing, finished products, sterilization and disinfection, warehousing and so on. Among them, sterilization and disinfection takes the longest time. Ethylene oxide is mostly used for sterilization and disinfection of materials, which requires 7-14 days of analysis, seriously affecting the production efficiency of medical   protective gown , and a more efficient sterilization method is urgently needed. Irradiation sterilization can be sterilized without disassembly and assembly, which is efficient and prevents secondary pollution. In 2011, Japan has listed the operation specifications of irradiation sterilization in the sterilization standard for protective clothing, which will reduce the sterilization time to less than 1 d. In order to address the shortage of medical protective clothes durin...
发表评论
阅读全文