跳至主要内容

Production requirements for disposable surgical gown

Strictly control the sterilization process to strictly control the production environment and packaging process
Raw materials entering the factory for inspection; strict control of sterilization process
The markings are clearly and correctly printed; the markings are marked in accordance with the relevant requirements. SpecificationTips on the instructions
Pre-use training 
The properties of the bonded or sewn parts should meet the standard requirements.
Disposable surgical gown should be supplied sterile and should be sterilized by a confirmed sterilization process.
Chemical performance requirements
If the disposable surgical gown is sterilized with ethylene oxide, the residual ethylene oxide should be no more than 10 mg/kg.
Biological performance requires a single-use surgical gown to be non-irritating and delayed hypersensitivity to the skin.
Structural requirements such as the tie should specify the length of the strap, the fastness of the strap fixation, and so on.
The breathability of the disposable surgical gown is very important for the use of the product and the guarantee of the quality of the operation. Considering that the current basis for the uniformity of the product's permeability index is insufficient, the manufacturer should combine the specific application of the product to the gas permeability of the product. Evaluation, and indicate the permeability index for each area.
Product inspection requirements Product inspection includes factory inspection and type inspection. The factory inspection shall include at least the residual ethylene oxide (if sterilized with ethylene oxide) and sterility. The type inspection report is one of the documents confirming the validity of the production process. The type inspection carried out at the time of registration shall be carried out by an inspection agency with legal qualifications. For type inspection, if there is no standard
Special regulations, full performance inspection according to the corresponding standard requirements, should be all qualified.
The clinical requirements of the product require a single-use surgical gown product design stereotype, mature technology, clinical application for many years, do not change
Unconventional use, no serious adverse event records, through non-clinical evaluation, registration testing and quality
System evaluation can ensure the safety and effectiveness of the product, so in principle, clinical trials are not required.

评论

发表评论

此博客中的热门博文

The Usage and Disinfection of Sterile Surgical Packs

Use methods and requirements ： 1.     In a dry environment,  sterile packs  are valid for seven days. 2.     Before using, check the name and the date of sterilization of the aseptic packs, whether the pack is loose or moist, and check the color change of the chemical indicator tape. 3.     Place the sterile  surgical pack  flat on the clean, dry and spacious operating table. 4.     After untying the tie belt and wrapping it, fold it under the back table cover, then pinch the outer corner of the back table cover with your fingers, and then uncover the outer corner, left and right corner and inner corner of the back table cover in turn.If a double-packing sterile surgical kit is used, the lining should be opened with sterile forceps. 5.     Use sterile forceps to pick up the required items and place them in a prepared sterile area. 6.     If the items in the package ...
发表评论
阅读全文

Introduction of surgical packs

Surgical packs   are generally made of paper, absorbent gauze, non-woven fabric and plastic film, sterilized by ethylene oxide(EO), one-time to use, it’s convenient and practical. Surgical packs   are generally composed of surgical drapes, mayo stand cover and back table cover . The surface of the surgical pack is neat, and the appearance is smooth, no odor, no defect or damage; the sewing or heat-shrinking is also straight, firm and evens. In addition, according to surgical requirements can increase other surgical accessories. Disposable surgery during the operation, have good role in blocking bacteria, aspiration, etc.. To ensure the sterile environment during surgery, and reducing the risk of cross-infection.           Anhui Medpurest Medical Technology Co., Ltd has got the FDA certification in 2017.   The products provided by the company include : Disposable Surgery Laminectomy Pack，Disposable Delivery Pack，Disposable Spinal/Joint Pack，D...
发表评论
阅读全文

Production process of medical protective clothing

  Generally speaking, the production of medical   protective coveralls   needs to go through the steps of raw material preparation, cutting, stitching, tightening, adhesive and pressing, finished products, sterilization and disinfection, warehousing and so on. Among them, sterilization and disinfection takes the longest time. Ethylene oxide is mostly used for sterilization and disinfection of materials, which requires 7-14 days of analysis, seriously affecting the production efficiency of medical   protective gown , and a more efficient sterilization method is urgently needed. Irradiation sterilization can be sterilized without disassembly and assembly, which is efficient and prevents secondary pollution. In 2011, Japan has listed the operation specifications of irradiation sterilization in the sterilization standard for protective clothing, which will reduce the sterilization time to less than 1 d. In order to address the shortage of medical protective clothes durin...
发表评论
阅读全文