跳至主要内容

Laminating Paper Production Process And Use

Laminating paper we also call it: PE coated paper, Pe coated paper, single plastic coated paper, double plastic coated paper, waterproof coated paper, moisture-proof coated paper, PE paper, coated paper.
The types of coated paper are mainly divided into: single plastic coated paper and double plastic coated paper.
Single plastic coated paper: We also call it single-sided coated paper, because it is a single-sided coating, but also plastic particles, so we will also call the coated paper as a single plastic coated paper.
Double plastic coated paper: We also call it double-sided coated paper, because it is divided into two types of coated paper, mainly divided into: single plastic coated paper and double plastic coated paper,
Single plastic coated paper: We also call it single-sided coated paper, because it is a single-sided coating, but also plastic particles, so we will also call the coated paper as a single plastic coated paper.
Double plastic coated paper: we also call it double coated paper because it is both sides
The film is covered with PE plastic particles, which we will also call double plastic coated paper.
Laminating paper: It is in the case of using various kraft papers as the base paper.
On the top of the kraft paper, the hot melt PE plastic particles are evenly coated on the surface of the paper to form a coated paper. Compared with ordinary paper, the coated paper has the characteristics of waterproofing and oil proof, and the PE plastic particles are composite materials. It has the characteristics of oil-proof, waterproof, heat-sealing, etc., but when used in different industries, it will go to its different characteristics. When it is packaged, it will automatically take its oil-proof characteristics. When used for coated paper, it will be packaged. When it is used in the packaging of automatic packaging machines, its heat-sealing characteristics are taken.
We all know that ordinary paper is made of wood fiber and has strong water absorption.
Everyone knows that paper absorbs moisture and is also afraid of tide. Instead, the PE plastic is melted and coated evenly with the surface of the paper to form a very thin film. Because of the heat fusion on the paper surface, the paper can be used. It is not easy to be detached from the PE film, and the whole process does not use heat sealing chemical solvent. It is very environmentally friendly, and in the later secondary processing and packaging, it does not need adhesive. It directly relies on this PE film in heat. Melt the seal.
Use in food coated paper:
If it is packaged in laminating paper for food packaging, it can effectively prevent moisture and oil. Disposable paper cups, hamburger paper bags, melon seeds, paper lunch boxes, food paper bags, aviation cleaning, as seen in our daily life.
A series of bags and the like are made of PE coated paper.
For industrial use:
Like ordinary industrial aspects, mainly using coated paper for moisture and water resistance, factory use
Come on the surface of the building material and block the moisture from entering the inside of the board.

评论

此博客中的热门博文

The Usage and Disinfection of Sterile Surgical Packs

Use methods and requirements : 1.     In a dry environment,  sterile packs  are valid for seven days. 2.     Before using, check the name and the date of sterilization of the aseptic packs, whether the pack is loose or moist, and check the color change of the chemical indicator tape. 3.     Place the sterile  surgical pack  flat on the clean, dry and spacious operating table. 4.     After untying the tie belt and wrapping it, fold it under the back table cover, then pinch the outer corner of the back table cover with your fingers, and then uncover the outer corner, left and right corner and inner corner of the back table cover in turn.If a double-packing sterile surgical kit is used, the lining should be opened with sterile forceps. 5.     Use sterile forceps to pick up the required items and place them in a prepared sterile area. 6.     If the items in the package ...

Introduction of surgical packs

Surgical packs   are generally made of paper, absorbent gauze, non-woven fabric and plastic film, sterilized by ethylene oxide(EO), one-time to use, it’s convenient and practical. Surgical packs   are generally composed of surgical drapes, mayo stand cover and back table cover . The surface of the surgical pack is neat, and the appearance is smooth, no odor, no defect or damage; the sewing or heat-shrinking is also straight, firm and evens. In addition, according to surgical requirements can increase other surgical accessories. Disposable surgery during the operation, have good role in blocking bacteria, aspiration, etc.. To ensure the sterile environment during surgery, and reducing the risk of cross-infection.           Anhui Medpurest Medical Technology Co., Ltd has got the FDA certification in 2017.   The products provided by the company include : Disposable Surgery Laminectomy Pack,Disposable Delivery Pack,Disposable Spinal/Joint Pack,D...

Production process of medical protective clothing

  Generally speaking, the production of medical   protective coveralls   needs to go through the steps of raw material preparation, cutting, stitching, tightening, adhesive and pressing, finished products, sterilization and disinfection, warehousing and so on. Among them, sterilization and disinfection takes the longest time. Ethylene oxide is mostly used for sterilization and disinfection of materials, which requires 7-14 days of analysis, seriously affecting the production efficiency of medical   protective gown , and a more efficient sterilization method is urgently needed. Irradiation sterilization can be sterilized without disassembly and assembly, which is efficient and prevents secondary pollution. In 2011, Japan has listed the operation specifications of irradiation sterilization in the sterilization standard for protective clothing, which will reduce the sterilization time to less than 1 d. In order to address the shortage of medical protective clothes durin...