跳至主要内容

Types And Uses of Protective Glasses

Safety glasses are a kind of glasses with special functions.
The mirror is also different. Such as outdoor anti-ultraviolet glasses, anti-impact glasses and anti-chemical glasses used in factories,
Surgical glasses for hospitals, welding glasses for electric welding, laser protection in laser engraving
Glasses, etc. Protective glasses are also known as labor protection glasses in industrial production and are divided into safety protective eyes
There are two types of mirrors and protective masks, which are mainly used to protect the eyes and face from ultraviolet and infrared rays
Radiation of electromagnetic waves such as microwaves, dust, smoke, metal and sand debris, and chemical solution splashes
Shooting damage.

1. Types and uses of safety glasses

1. Protective glasses against external impact, mainly used to protect the eyes from metal or sand and debris
Mechanical damage. The spectacle lens and spectacle frame should be strong and resistant to shock. There are edging around the frame, and there should be ventilation holes on it. The protective lens can be toughened glass, colloidal bonded glass or copper mesh protective glasses.

2. Protective glasses against chemical solutions are mainly used to prevent chemical damage to eyes caused by irritating or corrosive solutions. Ordinary flat lenses can be used, and the frame should be covered to prevent splashing of the solution.
Usually used in laboratories, hospitals and other places, general medical glasses can be used universally.

3. Anti-radiation protective glasses, used to prevent the danger of excessive ultraviolet rays and other radiation to the eyes
harm. The lens is made of special glass that can reflect or absorb radiation, but can transmit certain visible light
to make. The lens is coated with a bright chromium, nickel, mercury or silver metal film that can reflect radiation; blue
Colored lenses absorb infrared rays, yellow-green lenses absorb both ultraviolet and infrared rays, and colorless lead lenses
Absorb X-rays and rays. For example, common welding glasses require relatively low transmittance of the lens, so the color of the lens is mostly ink; laser protective glasses, as the name suggests, can prevent the radiation of laser to the glasses, so the requirements on the lens are very high, such as The choice of light source, attenuation rate, light reaction time, optical density, light transmission effect, etc., different nanometer (nm) lasers need to use different wavelength lenses.

评论

发表评论

此博客中的热门博文

The Usage and Disinfection of Sterile Surgical Packs

Use methods and requirements ： 1.     In a dry environment,  sterile packs  are valid for seven days. 2.     Before using, check the name and the date of sterilization of the aseptic packs, whether the pack is loose or moist, and check the color change of the chemical indicator tape. 3.     Place the sterile  surgical pack  flat on the clean, dry and spacious operating table. 4.     After untying the tie belt and wrapping it, fold it under the back table cover, then pinch the outer corner of the back table cover with your fingers, and then uncover the outer corner, left and right corner and inner corner of the back table cover in turn.If a double-packing sterile surgical kit is used, the lining should be opened with sterile forceps. 5.     Use sterile forceps to pick up the required items and place them in a prepared sterile area. 6.     If the items in the package ...
发表评论
阅读全文

Introduction of surgical packs

Surgical packs   are generally made of paper, absorbent gauze, non-woven fabric and plastic film, sterilized by ethylene oxide(EO), one-time to use, it’s convenient and practical. Surgical packs   are generally composed of surgical drapes, mayo stand cover and back table cover . The surface of the surgical pack is neat, and the appearance is smooth, no odor, no defect or damage; the sewing or heat-shrinking is also straight, firm and evens. In addition, according to surgical requirements can increase other surgical accessories. Disposable surgery during the operation, have good role in blocking bacteria, aspiration, etc.. To ensure the sterile environment during surgery, and reducing the risk of cross-infection.           Anhui Medpurest Medical Technology Co., Ltd has got the FDA certification in 2017.   The products provided by the company include : Disposable Surgery Laminectomy Pack，Disposable Delivery Pack，Disposable Spinal/Joint Pack，D...
发表评论
阅读全文

Production process of medical protective clothing

  Generally speaking, the production of medical   protective coveralls   needs to go through the steps of raw material preparation, cutting, stitching, tightening, adhesive and pressing, finished products, sterilization and disinfection, warehousing and so on. Among them, sterilization and disinfection takes the longest time. Ethylene oxide is mostly used for sterilization and disinfection of materials, which requires 7-14 days of analysis, seriously affecting the production efficiency of medical   protective gown , and a more efficient sterilization method is urgently needed. Irradiation sterilization can be sterilized without disassembly and assembly, which is efficient and prevents secondary pollution. In 2011, Japan has listed the operation specifications of irradiation sterilization in the sterilization standard for protective clothing, which will reduce the sterilization time to less than 1 d. In order to address the shortage of medical protective clothes durin...
发表评论
阅读全文