跳至主要内容

Classification And Requirements of Antibacterial Fabrics For Patients Gown

Distinguish from the material composition: the antibacterial fabrics of patient gown can be divided into two types: cotton and polyester cotton.

1. Common varieties of cotton are as follows:

C100 20*20 60*60; C100 21*21 108*58; C100 21*21 88*61; 21*21 90*50; 16*16 72*60.

2. Common varieties of polyester and cotton are:

T/C65*35 45*45 133*72; T/C65*35 21*21 100*50; T/C65*35 23*23 104*61.

Distinguish from the dyeing and finishing method: the antibacterial fabrics for patient clothing can be divided into two types: printing and dyeing

3. Common varieties of yarn-dyed fabrics are:

C100 21*21 88*61; 16*16 72*60.

4. The common varieties of printing are:

C100 20*20 60*60; C100 21*21 108*58; C100 21*21 90*50; T/C65*35 45*45 133*72; T/C65*35 21*21 100*50; T/ C65*35 23*23 104*61.


The antibacterial fabric of patient gown is relatively common, and the fabric of patient gown has the following characteristics:

A. High color fastness to abrasion, high color fastness to washing, and high color fastness to perspiration. Inpatients often lie on a hospital bed. When suffering, they will sweat and roll on the bed, and the frequency of washing is very high. Therefore, the color fastness of the clothing of the patient is required to be higher.

B. Can't afford the ball. The patient uniform is related to the image of the hospital. What is the reason for the pilling of fabric? The yarn of the textile fabric is composed of fibers, and some short fibers are easily exposed to the cloth surface. Due to the static electricity caused by friction, the short fibers are entangled with each other to form a ball. Therefore, the fabric of the patient suit must not contain staple fibers that are easy to pilling.

C, breathable and breathable. Inpatients are generally more prone to sweating, so the fabric of the patient's clothing is required to have good sweat absorption and breathability.

D. Chlorine bleach resistance. Hospitals usually use chlorine-containing disinfection water to sterilize clothing. Chlorine is a bleaching agent. Chlorine has a peeling effect on clothing dyes. Therefore, patient clothing fabrics must use dyes with the best resistance to chlorine bleaching. Otherwise, the fabric fades quickly until all colors are faded.

评论

发表评论

此博客中的热门博文

Tyvek Protective Coveralls

  Tyvek   Protective Coveralls  (Tyvek) is a wide range of   protective gown   manufactured by Tyvek (Tyvek) for use by emergency responders to industrial workers. Tyvek  protective clothing  offers the industry's proven most scientific solutions, including the reliable brand 3360Tyvek for dust protection, Tychem for liquid and gas hazardous chemical protection, NOMEX for heat and flame protection, and KEVLAR for cutting and wear protection. TYVEK protective suit is made of traditional TYVEK polymer coating. It has the strength/weight ratio and softness of TYVEK protective suit, which can completely protect fine and harmful dust, concentrated inorganic acid and alkali and water and salt solution. Protects up to 2 bar pressure from spatter. The Tevetron protective suit (Tevetron) has been proven to protect fluids, blood and pathogens in blood through osmosis tests with blood and virus substitutes. Function description of Trevek protective suit: TYVEK pr...
发表评论
阅读全文

Biodegradability, reusability and safety of protective clothing

  Microplastic pollution, known as "pm2.5 in water", has become a direct source of pollution in the ocean, soil and drinking water, affecting human health. Medical   protective coveralls   is almost made of different polymer materials. The development of a new material can replace the existing material to form a new series of products. As most of the existing   protective suits  are designed to be disposable, they are used heavily during the pandemic. Used medical   protective clothing   should be disposed of centrally to prevent secondary transmission of the virus. Therefore, protective clothing materials must be developed to be repeatable and degradable. Due to the particularity of application scenarios, most medical  protective gown  is disposable. Therefore, environment-friendly materials should be considered in the development of medical  protective gown , and must be considered before material selection and protective clothes desig...
发表评论
阅读全文

Production process of medical protective clothing

  Generally speaking, the production of medical   protective coveralls   needs to go through the steps of raw material preparation, cutting, stitching, tightening, adhesive and pressing, finished products, sterilization and disinfection, warehousing and so on. Among them, sterilization and disinfection takes the longest time. Ethylene oxide is mostly used for sterilization and disinfection of materials, which requires 7-14 days of analysis, seriously affecting the production efficiency of medical   protective gown , and a more efficient sterilization method is urgently needed. Irradiation sterilization can be sterilized without disassembly and assembly, which is efficient and prevents secondary pollution. In 2011, Japan has listed the operation specifications of irradiation sterilization in the sterilization standard for protective clothing, which will reduce the sterilization time to less than 1 d. In order to address the shortage of medical protective clothes durin...
发表评论
阅读全文