跳至主要内容

International Standards For Protective Gown

 (1) Disposable non-woven (non-woven fabric) materials are basically used for medical protective gown  internationally. There are certain differences in the focus of protective gown indicators, product performance requirements, test methods, etc. in each country, due to different test methods The key project indicators cannot be simply compared based on data.


(2) In GB19082-2009 "Technical Requirements for Medical Disposable Protective Clothing", the filtration efficiency of key indicators is not mentioned in other national standards. However, some key indicators such as "microbial penetration, anti-pollutant penetration and other test items are not involved, and both the US and EU standards have impermeable requirements.


(3) In addition to the key index requirements, in terms of physical safety during use, NFPA 1999 also requires strengths such as tearing, seams, item breaks, punctures, etc. in addition to the breaking strength requirements for emergency medical protective clothing , And the overall thermal comfort of emergency medical protective clothing is also required. GB 19082 only considers the breaking strength of the key parts of protective clothing and surgical gowns during the test. There is no requirement for tearing or bursting, and there are certain risks in use.


(4) Regarding the requirements for taking comfort, the Chinese, American and European standards have different focuses. The Chinese standards have requirements for moisture permeability, while the American standards focus on the requirements for warmth performance.


(5) American protective gown standard ANSI/AAMI PB 70: 12 standard divides the isolation ability of protective clothing into 4 levels. Among them, the products with the highest protection level are required to pass the two key test standards of ASTM F1670 (synthetic fluid penetration) and ASTM F1671 (virus penetration). It must pass at least ASTM F1670 test to meet the minimum standard of China's national standard medical protective clothes.


(6) The European standard protective gown consists of two sub-standard systems, the EN14126 standard for infection prevention and the TYPE sub-standard for resistance to gas, liquid, and solid particle penetration. According to different protection objects, European standard protective clothing is divided into 6 types: TYPE 1 and TYPE 2 for gas-level protection, TYPE 3/4/6 for liquid protection, TYPE 5 for solid and aerosol particle protection and clothing Tear strength. European standard protective clothes anti-synthetic blood penetration test reference standard ISO 16603. The standard classifies the protective gown penetration resistance to synthetic fluids into 6 levels, with 6 being the highest. Both ISO 16603 Level 2 (CLASS 2) and the Chinese National Standard are 1.75kPa. European standard protective clothing must have EN14126, and at least reach TYPE4, in order to meet the national standard.


GN0J))D3S)[5C)T[%[1A}M5.png

评论

发表评论

此博客中的热门博文

The Usage and Disinfection of Sterile Surgical Packs

Use methods and requirements ： 1.     In a dry environment,  sterile packs  are valid for seven days. 2.     Before using, check the name and the date of sterilization of the aseptic packs, whether the pack is loose or moist, and check the color change of the chemical indicator tape. 3.     Place the sterile  surgical pack  flat on the clean, dry and spacious operating table. 4.     After untying the tie belt and wrapping it, fold it under the back table cover, then pinch the outer corner of the back table cover with your fingers, and then uncover the outer corner, left and right corner and inner corner of the back table cover in turn.If a double-packing sterile surgical kit is used, the lining should be opened with sterile forceps. 5.     Use sterile forceps to pick up the required items and place them in a prepared sterile area. 6.     If the items in the package ...
发表评论
阅读全文

Introduction of surgical packs

Surgical packs   are generally made of paper, absorbent gauze, non-woven fabric and plastic film, sterilized by ethylene oxide(EO), one-time to use, it’s convenient and practical. Surgical packs   are generally composed of surgical drapes, mayo stand cover and back table cover . The surface of the surgical pack is neat, and the appearance is smooth, no odor, no defect or damage; the sewing or heat-shrinking is also straight, firm and evens. In addition, according to surgical requirements can increase other surgical accessories. Disposable surgery during the operation, have good role in blocking bacteria, aspiration, etc.. To ensure the sterile environment during surgery, and reducing the risk of cross-infection.           Anhui Medpurest Medical Technology Co., Ltd has got the FDA certification in 2017.   The products provided by the company include : Disposable Surgery Laminectomy Pack，Disposable Delivery Pack，Disposable Spinal/Joint Pack，D...
发表评论
阅读全文

Production process of medical protective clothing

  Generally speaking, the production of medical   protective coveralls   needs to go through the steps of raw material preparation, cutting, stitching, tightening, adhesive and pressing, finished products, sterilization and disinfection, warehousing and so on. Among them, sterilization and disinfection takes the longest time. Ethylene oxide is mostly used for sterilization and disinfection of materials, which requires 7-14 days of analysis, seriously affecting the production efficiency of medical   protective gown , and a more efficient sterilization method is urgently needed. Irradiation sterilization can be sterilized without disassembly and assembly, which is efficient and prevents secondary pollution. In 2011, Japan has listed the operation specifications of irradiation sterilization in the sterilization standard for protective clothing, which will reduce the sterilization time to less than 1 d. In order to address the shortage of medical protective clothes durin...
发表评论
阅读全文