跳至主要内容

Fabrication And Application of Orthopedic Patient Gown

 When changing clothes for patients with fracture or dislocation of joint, although routine orthopedic care has been performed, the healthy limb shall be removed first before the affected limb is removed, and the affected limb shall be worn first before the healthy limb is worn, and two nurses shall be required to operate, one to lift the affected limb and the other to replace it, so as to alleviate the pain of the patient.

In practice, patients are often reluctant to change clothes because of the pain caused by the replacement, or the affected limb is unable to wear clothes. Especially in patients with bilateral or multiple fractures. For this reason, Our company-MedPurest design and manufacture the orthopedic patient gown, through clinical trials, the effect is satisfactory.

1. Clinical data

Three different colors of cotton (small and large sizes for different colors) flat elastic bands, buttons.

2, the production method

The length of the trousers is the same as that of the traditional patient gowns, and the width is slightly wider than that of the traditional patient clothes. Divided into large, medium and small sizes. The production of the coat: the chicken heart-collar is cut and made according to the traditional method, the storage pouch is installed in the front of the coat, and the middle line of the sleeve (namely the sleeve) is used

Cut from the cuff to the neckline 7 cm to the inner side, add hem, open the buttonhole, and fasten the button. The distance between buttons is about 10cm. Making of trousers: cut and made according to traditional patient gown, in the front of the trousers

Cut the line 7 cm from the trouser leg to the waist, add the edge, open the buttonhole, and install the button. The distance between the button and the button is about 10 cm. Sew a flat elastic band on the waistband, and fold the elastic band firmly at the cutting place.

3, use method

Wear: unbutton the button on the affected side, wear the limb first, pull the sleeve or pants on the affected side, smooth the button. Take off: first unbutton the affected side, pull open the sleeves or trousers, and then take off the healthy limb. If there is a catheter, drainage tube, first put the catheter from the opening of the gown external fixation Okay, button up again.

4. Advantages

(1) Easy to wear and take off, save time and effort, improve work efficiency, reduce the workload of nurses.

(2) Beautiful and generous, comfortable, warm.

(3) All kinds of catheters are pulled out of the clothes from the opening to avoid distortion and discounting. When carrying a patient or walking,Drainage bag into the storage bag. Reduce prolapse.

(4) Unbuttoning facilitates examination, disposal and observation, and relieves the pain of patients.

(5) The adding edge is not in the bone process, the side lying and supine are not affected, and the occurrence of pressure sores can be reduced.

(6) Facilitate the solution of urine and feces.

(7) Production simple.

(8) Widely used, not only unilateral, bilateral, multiple body fractures can be used.

评论

发表评论

此博客中的热门博文

The Usage and Disinfection of Sterile Surgical Packs

Use methods and requirements ： 1.     In a dry environment,  sterile packs  are valid for seven days. 2.     Before using, check the name and the date of sterilization of the aseptic packs, whether the pack is loose or moist, and check the color change of the chemical indicator tape. 3.     Place the sterile  surgical pack  flat on the clean, dry and spacious operating table. 4.     After untying the tie belt and wrapping it, fold it under the back table cover, then pinch the outer corner of the back table cover with your fingers, and then uncover the outer corner, left and right corner and inner corner of the back table cover in turn.If a double-packing sterile surgical kit is used, the lining should be opened with sterile forceps. 5.     Use sterile forceps to pick up the required items and place them in a prepared sterile area. 6.     If the items in the package ...
发表评论
阅读全文

Introduction of surgical packs

Surgical packs   are generally made of paper, absorbent gauze, non-woven fabric and plastic film, sterilized by ethylene oxide(EO), one-time to use, it’s convenient and practical. Surgical packs   are generally composed of surgical drapes, mayo stand cover and back table cover . The surface of the surgical pack is neat, and the appearance is smooth, no odor, no defect or damage; the sewing or heat-shrinking is also straight, firm and evens. In addition, according to surgical requirements can increase other surgical accessories. Disposable surgery during the operation, have good role in blocking bacteria, aspiration, etc.. To ensure the sterile environment during surgery, and reducing the risk of cross-infection.           Anhui Medpurest Medical Technology Co., Ltd has got the FDA certification in 2017.   The products provided by the company include : Disposable Surgery Laminectomy Pack，Disposable Delivery Pack，Disposable Spinal/Joint Pack，D...
发表评论
阅读全文

Production process of medical protective clothing

  Generally speaking, the production of medical   protective coveralls   needs to go through the steps of raw material preparation, cutting, stitching, tightening, adhesive and pressing, finished products, sterilization and disinfection, warehousing and so on. Among them, sterilization and disinfection takes the longest time. Ethylene oxide is mostly used for sterilization and disinfection of materials, which requires 7-14 days of analysis, seriously affecting the production efficiency of medical   protective gown , and a more efficient sterilization method is urgently needed. Irradiation sterilization can be sterilized without disassembly and assembly, which is efficient and prevents secondary pollution. In 2011, Japan has listed the operation specifications of irradiation sterilization in the sterilization standard for protective clothing, which will reduce the sterilization time to less than 1 d. In order to address the shortage of medical protective clothes durin...
发表评论
阅读全文