跳至主要内容

How to Wash Hands After Medical Staff Put on Disposable Scrub Suits

 Disposable scrub suits are generally made of SMS material, and the style is V-neck short-sleeved short. Easy to put on and take off.


The medical staff put on Disposable scrub suit before the operation and then began to wash and disinfect their hands.


Seven-step handwashing

1. The definition of hand washing Hand washing is the process of removing dirt on the skin and temporary residence by medical staff with soap (soap) and running water


2. The purpose of the seven-step hand-washing method: Remove hand dirt and bacteria, prevent contact with infection; prepare before aseptic surgery or operation.


3. Preparation before washing hands:

 (1) Environmental requirements: spacious and bright, with non-contact tap and waist-high sink.

 (2) Facilities requirements:

         1. Flowing water.

         2. Non-hand contact faucet switch.

         3. Cleaners should contain skin care ingredients and use disposable packaging. Reusable containers should be cleaned and disinfected each time they are used up. If it is soap, keep it clean and dry.

         4. It should be equipped with disposable hand towels or hand dryers, or other hand drying methods that can avoid secondary pollution.

(3) Hand washing requirements: no wounds on the hands, cut nails flat; wear disposable scrub suit, masks, hats; prepare hand sanitizer (or soap) and dry sterile hand towels.


 4. Seven-step hand-washing steps: The seven-step hand-washing steps are as follows:

Step 1:is to wash the palms: wet hands with running water, apply hand sanitizer (or soap), palms facing each other, and rub the fingers together (20~30s);

Step 2: is to wash the back side of the finger joints: rub the palms of the hands along the back of the hands and exchange the hands (20~30s);

Step 3: Wash the palms of the fingers: palms face each other, and rub your hands together along the fingers (20~30s);

Step 4 Wash the thumb: hold the thumb in one hand and rub the thumb in the other hand, exchange hands (20~30s);

Step 5 Wash the back of the fingers: Bend the joints of each finger, make a half-fist, place the back of the finger on the palm of the other hand, rotate and rub, exchange hands (20~30s);

Step 6 Wash your fingertips: bend each finger joint, put your fingertips together in the palm of the other hand, rotate and rub, exchange your hands (20~30s);

Step 7 Wash your wrists and arms: scrub your wrists and arms up to 6cm above the elbow (for non-surgery, wash your hands up to 5cm above the wrist joint), exchange your hands (60s). Finally, rinse the hand sanitizer (or soap) with running water, and dry your hands with a dry sterile hand towel.


Five and seven-step hand washing notes:

 1. Carefully rub your hands for more than 20-30 seconds during the whole process of hand washing. Carefully wash the nails, fingertips, finger joints and knuckles and other easily contaminated parts.

 2. Don't wear rings or other accessories on your hands. Particular attention should be paid to thoroughly cleaning the parts where rings, watches and other decorations are worn (if possible, rings, watches and other accessories should also be cleaned). The decorations on your hands should be removed first and then thoroughly cleaned. A "special zone" that hides dirt and dirt is formed locally, and a little carelessness will cause bacteria to "leak through the net".

3. Use disposable paper towels or small clean towels to dry your hands. The towels should be disinfected one by one.

4. When the hands are not significantly contaminated by the patient's blood, body fluids and other substances, quick-drying hand disinfectants can be used to disinfect hands instead of washing hands.

评论

此博客中的热门博文

Tyvek Protective Coveralls

  Tyvek   Protective Coveralls  (Tyvek) is a wide range of   protective gown   manufactured by Tyvek (Tyvek) for use by emergency responders to industrial workers. Tyvek  protective clothing  offers the industry's proven most scientific solutions, including the reliable brand 3360Tyvek for dust protection, Tychem for liquid and gas hazardous chemical protection, NOMEX for heat and flame protection, and KEVLAR for cutting and wear protection. TYVEK protective suit is made of traditional TYVEK polymer coating. It has the strength/weight ratio and softness of TYVEK protective suit, which can completely protect fine and harmful dust, concentrated inorganic acid and alkali and water and salt solution. Protects up to 2 bar pressure from spatter. The Tevetron protective suit (Tevetron) has been proven to protect fluids, blood and pathogens in blood through osmosis tests with blood and virus substitutes. Function description of Trevek protective suit: TYVEK pr...

Biodegradability, reusability and safety of protective clothing

  Microplastic pollution, known as "pm2.5 in water", has become a direct source of pollution in the ocean, soil and drinking water, affecting human health. Medical   protective coveralls   is almost made of different polymer materials. The development of a new material can replace the existing material to form a new series of products. As most of the existing   protective suits  are designed to be disposable, they are used heavily during the pandemic. Used medical   protective clothing   should be disposed of centrally to prevent secondary transmission of the virus. Therefore, protective clothing materials must be developed to be repeatable and degradable. Due to the particularity of application scenarios, most medical  protective gown  is disposable. Therefore, environment-friendly materials should be considered in the development of medical  protective gown , and must be considered before material selection and protective clothes desig...

Production process of medical protective clothing

  Generally speaking, the production of medical   protective coveralls   needs to go through the steps of raw material preparation, cutting, stitching, tightening, adhesive and pressing, finished products, sterilization and disinfection, warehousing and so on. Among them, sterilization and disinfection takes the longest time. Ethylene oxide is mostly used for sterilization and disinfection of materials, which requires 7-14 days of analysis, seriously affecting the production efficiency of medical   protective gown , and a more efficient sterilization method is urgently needed. Irradiation sterilization can be sterilized without disassembly and assembly, which is efficient and prevents secondary pollution. In 2011, Japan has listed the operation specifications of irradiation sterilization in the sterilization standard for protective clothing, which will reduce the sterilization time to less than 1 d. In order to address the shortage of medical protective clothes durin...