跳至主要内容

Introduction of surgical gowns

 The first surgical gown was produced in the early 20th century and in originally adopted to create a barrier between non-sterile and sterile areas to prevent wound infection and protect patients and Medical staff.
        Disposable materials are generally used in disposable surgical gowns, mainly SMS/SMMS gowns, and reinforcements for non-woven composites. Anhui MedPurest Medical Technology Co., Ltd was obtained  US FDA in 2017 and provided surgical gowns including Poly-Reinforced Specialty Surgical Gown, Fabric-Reinforced Surgical Gowns, Non-Reinforced Surgical Gowns, etc..
       In recent years, With the spread of medical knowledge and the development of medical technology. Medical staff pay more attention to the surgical gowns. With the joint efforts of the government, hospitals and enterprises, we will improve products quality products and improve supporting measures to create high-quality products to meet market demands.
https://www.medpurest.com/surgical-gown/

评论

发表评论

此博客中的热门博文

Biodegradability, reusability and safety of protective clothing

  Microplastic pollution, known as "pm2.5 in water", has become a direct source of pollution in the ocean, soil and drinking water, affecting human health. Medical   protective coveralls   is almost made of different polymer materials. The development of a new material can replace the existing material to form a new series of products. As most of the existing   protective suits  are designed to be disposable, they are used heavily during the pandemic. Used medical   protective clothing   should be disposed of centrally to prevent secondary transmission of the virus. Therefore, protective clothing materials must be developed to be repeatable and degradable. Due to the particularity of application scenarios, most medical  protective gown  is disposable. Therefore, environment-friendly materials should be considered in the development of medical  protective gown , and must be considered before material selection and protective clothes desig...
发表评论
阅读全文

Production process of medical protective clothing

  Generally speaking, the production of medical   protective coveralls   needs to go through the steps of raw material preparation, cutting, stitching, tightening, adhesive and pressing, finished products, sterilization and disinfection, warehousing and so on. Among them, sterilization and disinfection takes the longest time. Ethylene oxide is mostly used for sterilization and disinfection of materials, which requires 7-14 days of analysis, seriously affecting the production efficiency of medical   protective gown , and a more efficient sterilization method is urgently needed. Irradiation sterilization can be sterilized without disassembly and assembly, which is efficient and prevents secondary pollution. In 2011, Japan has listed the operation specifications of irradiation sterilization in the sterilization standard for protective clothing, which will reduce the sterilization time to less than 1 d. In order to address the shortage of medical protective clothes durin...
发表评论
阅读全文

Production requirements for disposable surgical gown

Disposable surgical  gown   Strictly control the sterilization process to strictly control the production environment and packaging process Raw materials entering the factory for inspection; strict control of sterilization process The markings are clearly and correctly printed; the markings are marked in accordance with the relevant requirements. SpecificationTips on the instructions Pre-use training   The properties of the bonded or sewn parts should meet the standard requirements. Disposable surgical gown should be supplied sterile and should be sterilized by a confirmed sterilization process. Chemical performance requirements If the disposable surgical gown is sterilized with ethylene oxide, the residual ethylene oxide should be no more than 10 mg/kg. Biological performance requires a single-use surgical gown to be non-irritating and delayed hypersensitivity to the skin. Structural requirements such as the tie should specify the length of the ...
发表评论
阅读全文